Add products by adding codes
HQ Automotive Wiper Blade fits FORD Mondeo Estate (2007-2014) Rear 19" OEM FIT with Dedicated fit connector HQ4A19
- • PREMIUM 1PC SET: Includes 19-inch rear wiper blade, designed to cover maximum rear window area with even pressure distribution
Tired of streaks and noise? Upgrade to crystal-clear visibility with HQ Automotive premium wiper blades, specifically engineered for a perfect, OEM-grade fit on all FORD Mondeo Estate models (2007-2014).
This listing is for a single rear blade: 19-inch. The pre-installed Dedicated fit connector makes for a quick, tool-free installation on the rear arm, while the advanced graphite-coated natural rubber and aerodynamic profile ensure a quiet, streak-free wipe in all weather.
This blade is tested to OEM standards for durability, making it a reliable upgrade or replacement.
Do it yourself and be ready for the MOT. Each blade is backed by a 1-year warranty covering material and manufacturing defects, giving you peace of mind against premature wear or failure. Plus, we offer 30-day hassle-free returns — if the blades don’t fit or perform as expected, simply return it for a full refund or exchange.
What rear wiper blade fits the FORD Mondeo Estate (2007-2014)?
This HQ Automotive Rear Wiper Blade is a direct-fit replacement for the FORD Mondeo Estate (2007-2014, all trims). It includes a single 19-inch-inch rear blade engineered to match OEM specifications with a Dedicated fit connector for quick, secure installation.
Are these blades equivalent to Bosch or Valeo wipers?
Yes. HQ Automotive blades are engineered to perform at the same standard as Bosch Aerotwin and Valeo Silencio, offering streak-free wiping and long-lasting durability. Many customers choose HQ Automotive as a better value alternative to those premium brands.
How long do HQ Automotive wiper blades last?
HQ Automotive blades are built with durable, graphite-coated natural rubber and an aerodynamic design, meaning they can last for years. However, actual lifespan depends on many factors such as frequency of use, local weather conditions, and storage. For best visibility and safety, we recommend replacing them annually.
Do these wipers come with a warranty?
Yes. All HQ Automotive wiper blades include a 1-year warranty against material and manufacturing defects. If the blades wear out prematurely, you’re covered. In addition, we offer 30-day hassle-free returns if the blades don’t fit or perform as expected.
Can I install this rear wiper blade myself?
Yes. Installation takes only a few minutes. The Dedicated fit connector system makes it a tool-free process. Simply unclip your old rear blade and click the HQ Automotive replacement into place.
Why is my new wiper blade juddering or skipping?
Bent or twisted wiper arm – The arm does not press evenly, causing the blade to skip. Fix: Lift the arm, clean the spindle, and check the arm’s alignment against the windscreen. Gently adjust the angle (max 2–3°) so the rubber sits flat. If the arm spring is weak, consider replacing the arm.
Incorrect blade angle (park position / alignment) – The blade starts too high/low or at the wrong angle to the sweep. Fix: Reset the rest position according to the vehicle manual (arm on the spindle spline). In the resting position the blade edge should be ~90° to the glass, lying flat.
Dirty windscreen or rubber (wax, silicone, road film) – Leaves a greasy film that causes judder. Fix (2 min): Windscreen: Clean with IPA/glass degreaser or ammonia-based cleaner, then finish with fresh water. Rubber: Wipe with a soft cloth, warm water and a drop of washing-up liquid. Do not use silicone sprays.
Blade on a cold/icy windscreen – Hard rubber + ice/frost = skipping. Fix: Warm the windscreen (heater/demister), remove ice with a scraper, and only then switch on the wipers.
The wipers don’t fit / size is wrong. What should i do?
Occasionally, some car models have small differences in wiper sizes or fittings, even within the same year. If your blades don’t fit, simply contact us and send photos of your existing wiper along with the length measurement. We’ll verify the correct version for your car and send a replacement.
